Modify the DeAWST2_6_1 sketch

Hello,

I have the Ventus W155 weather station and the external Ventus W044 temperature/humidity sensor. I use Arduino Duemilanove board, the 433Mhz receiver from freetronics an an serial 20x4 I2C display (http://www.ebay.nl/itm/Serial-2004-LCD-Module-Display-For-arduino-IIC-I2C-TWI-204-20X4-Character-/110848845730?pt=LH_DefaultDomain_0&hash=item19cf1b27a2). With Arduino 0023 for Windows and the DeAWST2_6_1 sketch from the Auriol Weather Station Forum (http://forum.auriolws.info/).
Until now I receive the signals of the sensors on my PC. It’s works fine. But I will also see the temperature / humidity of channel 1 (outdoor), the temperature / humidity of channel 2 (Ventus W044, indoor) and the windspeed on my serial display.
How can help me too modify the DeAWST2_6_1 sketch?

Greetings,
Jack

DeAWST2_6_1.pde (27.4 KB)

lcd.pde (12.8 KB)

serialog.pde (2.64 KB)

deb.pde (2.38 KB)

How can help me too modify the DeAWST2_6_1 sketch?

To do what differently?

The sketch is writed for the Nokia LCD_3310 (lcd.pde).
I will use a LCD 20x4 I2C instead of the Nokia display.
I think the sketch lcd.pde and the sketch DeAWST2_6_1.pde must be modify.
But I am not sure.

Jack

I think the sketch lcd.pde and the sketch DeAWST2_6_1.pde must be modify. But I am not sure.

So, you'll be back later with the requirements, but, we should get started right away with the coding. Sure, I'll get right on that.

Hi all,

My wishes for the LCD display. At the first row: indoor temperature, indoor humidity At the second row: outdoor temperature, outdoor humidity At the third row: wind speed, wind direction At the fourth row: rainfall

Who can help me further?

Jack

Look in the arduino playground, theres an example