I build a Sanguino board and there are only a couple things
I needed to do to get it to work with the Arduino tools.
- added a compile switch for the LED
pin. I connect the LED to PORTD Pin 7. - changed the clock frequency in the Makefile. My board
runs at 12MHz (3.3V system). - Added the Sanguino libraries
- Added an entry block to boards.txt
The board is called an NB2A. There is some application information
on my website. See Loading...
Also I have a DAC and RTC application hint.
(* jcl *)
www: http://www.wiblocks.com
twitter: http://twitter.com/wiblocks
blog: http://luciani.org