Multiple SSID's using one ESP8266 Module?

hi all
i have just finished my last topic and that was solved thanks to PERT not heres a kinda hard question…
is it possible to create multiple ssids and passwords for a web server and AP.

Heres the code:

/*
 WiFiEsp example: WebServerAP

 A simple web server that shows the value of the analog input 
 pins via a web page using an ESP8266 module.
 This sketch will start an access point and print the IP address of your
 ESP8266 module to the Serial monitor. From there, you can open
 that address in a web browser to display the web page.
 The web page will be automatically refreshed each 20 seconds.

 For more details see: http://yaab-arduino.blogspot.com/p/wifiesp.html
*/

#include "WiFiEsp.h"

// Emulate Serial1 on pins 6/7 if not present
#ifndef HAVE_HWSERIAL1
#include "SoftwareSerial.h"
SoftwareSerial Serial1(6, 7); // RX, TX
#endif

char ssid[] = "Hyper-V Private Gaming Network";         // your network SSID (name)
char pass[] = "66c679fa";        // your network password
int status = WL_IDLE_STATUS;     // the Wifi radio's status
int reqCount = 0;                // number of requests received

WiFiEspServer server(80);

// use a ring buffer to increase speed and reduce memory allocation
RingBuffer buf(8);

void setup()
{
  Serial.begin(115200);   // initialize serial for debugging
  Serial1.begin(115200);    // initialize serial for ESP module
  WiFi.init(&Serial1);    // initialize ESP module

  // check for the presence of the shield
  if (WiFi.status() == WL_NO_SHIELD) {
    Serial.println("WiFi shield not present");
    while (true); // don't continue
  }

  Serial.print("Attempting to start AP ");
  Serial.println(ssid);

  // uncomment these two lines if you want to set the IP address of the AP
  //IPAddress localIp(192, 168, 111, 111);
  //WiFi.configAP(localIp);
  
  // start access point
  status = WiFi.beginAP(ssid, 10, pass, ENC_TYPE_WPA2_PSK);

  Serial.println("Access point started");
  printWifiStatus();
  
  // start the web server on port 80
  server.begin();
  Serial.println("Server started");
}


void loop()
{
  WiFiEspClient client = server.available();  // listen for incoming clients

  if (client) {                               // if you get a client,
    Serial.println("New client");             // print a message out the serial port
    buf.init();                               // initialize the circular buffer
    while (client.connected()) {              // loop while the client's connected
      if (client.available()) {               // if there's bytes to read from the client,
        char c = client.read();               // read a byte, then
        buf.push(c);                          // push it to the ring buffer

        // you got two newline characters in a row
        // that's the end of the HTTP request, so send a response
        if (buf.endsWith("\r\n\r\n")) {
          sendHttpResponse(client);
          break;
        }
      }
    }
    
    // give the web browser time to receive the data
    delay(10);

    // close the connection
    client.stop();
    Serial.println("Client disconnected");
  }
}

void sendHttpResponse(WiFiEspClient client)
{
  client.print(
    "HTTP/1.1 200 OK\r\n"
    "Content-Type: text/html\r\n"
    "Connection: close\r\n"  // the connection will be closed after completion of the response
    "Refresh: 2\r\n"        // refresh the page automatically every 20 sec
    "\r\n");
  client.print("<!DOCTYPE HTML>\r\n");
  client.print("<html>\r\n");
  client.print("<h1>You Are Connected!</h1>\r\n");
  client.print("Requests received: ");
  client.print(++reqCount);
  client.print("
\r\n");
  client.print("Analog input A0: ");
  client.print(analogRead(0));
  client.print("
\r\n");
  client.print("
\r\n");
  client.print("
\r\n");
  client.print("You Are Free To Execute A Network Based Application / Game");
  client.print("
\r\n");
  client.print("Internet Access: False");
  client.print("
\r\n");
  client.print("Internet Module Comming Soon!");
  client.print("
\r\n");
  client.print("
\r\n");
  client.print("
\r\n");
  client.print("IP Address: 192.168.4.1");
  client.print("
\r\n");
  client.print("</html>\r\n");
}

void printWifiStatus()
{
  // print your WiFi shield's IP address
  IPAddress ip = WiFi.localIP();
  Serial.print("IP Address: ");
  Serial.println(ip);

  // print where to go in the browser
  Serial.println();
  Serial.print("To see this page in action, connect to ");
  Serial.print(ssid);
  Serial.print(" and open a browser to http://");
  Serial.println(ip);
  Serial.println();
}