# NANO CLONe with CH340: cannot set com-state

**URL:** <https://forum.arduino.cc/t/nano-clone-with-ch340-cannot-set-com-state/1447718>\
**Category:** 3rd Party Boards\
**Created:** [June 9, 2026, 10:58am UTC](https://forum.arduino.cc/t/nano-clone-with-ch340-cannot-set-com-state/1447718 "2026-06-09T10:58:46Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![bc238c](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/bc238c/32/1152212_2.png) [@bc238c](https://forum.arduino.cc/u/bc238c)\
**Post date:** [June 9, 2026, 10:58am UTC](https://forum.arduino.cc/t/nano-clone-with-ch340-cannot-set-com-state/1447718/1 "2026-06-09T10:58:46Z")

</div>

Hi, just for the record: It took me quite a while to solve the problem of Arduino NANO clones with the CH340 serial interface chip. The following solution worked for me:

WIN 10  
ARDUINO IDE 1.8.19  
Installed driver: 3.7.2022.1  
DO NOT USE a more modern driver as at least the driver 3.9.2024.9 from WCN is buggy.

AVRDude Ver. 6.3-arduino17  
Also it could be possible AVRDude 8.0-arduino.1 cannot handle the proper timing of the CH340 properly. Can anybody confirm this?

---

<div class="post-metadata">

**Author:** ![sterretje](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/sterretje/32/391294_2.png) [@sterretje](https://forum.arduino.cc/u/sterretje)\
**Post date:** [June 9, 2026, 1:47pm UTC](https://forum.arduino.cc/t/nano-clone-with-ch340-cannot-set-com-state/1447718/3 "2026-06-09T13:47:04Z")

</div>

> [@bc238c](#):
>
> DO NOT USE a more modern driver as at least the driver 3.9.2024.9 from WCN is buggy.

I do not have a problem with that driver. Does your CH340 have a marking on it?

Result of upload using IDE 1.8.19, IDE 2.x also works without problems.

```plaintext
Sketch uses 1960 bytes (6%) of program storage space. Maximum is 30720 bytes.
Global variables use 194 bytes (9%) of dynamic memory, leaving 1854 bytes for local variables. Maximum is 2048 bytes.
C:\Users\bugge\ArduinoIDE\1_arduino-1.8.19.generic\portable\packages\arduino\tools\avrdude\6.3.0-arduino17/bin/avrdude -CC:\Users\bugge\ArduinoIDE\1_arduino-1.8.19.generic\portable\packages\arduino\tools\avrdude\6.3.0-arduino17/etc/avrdude.conf -v -patmega328p -carduino -PCOM19 -b57600 -D -Uflash:w:C:\Users\bugge\AppData\Local\Temp\arduino_build_953838/exportTest_01.ino.hex:i 

avrdude: Version 6.3-20190619
         Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
         Copyright (c) 2007-2014 Joerg Wunsch

         System wide configuration file is "C:\Users\bugge\ArduinoIDE\1_arduino-1.8.19.generic\portable\packages\arduino\tools\avrdude\6.3.0-arduino17/etc/avrdude.conf"

         Using Port : COM19
         Using Programmer : arduino
         Overriding Baud Rate : 57600
         AVR Part : ATmega328P
         Chip Erase delay : 9000 us
         PAGEL : PD7
         BS2 : PC2
         RESET disposition : dedicated
         RETRY pulse : SCK
         serial program mode : yes
         parallel program mode : yes
         Timeout : 200
         StabDelay : 100
         CmdexeDelay : 25
         SyncLoops : 32
         ByteDelay : 0
         PollIndex : 3
         PollValue : 0x53
         Memory Detail :

                                  Block Poll Page Polled
           Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack
           ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
           eeprom 65 20 4 0 no 1024 4 0 3600 3600 0xff 0xff
           flash 65 6 128 0 yes 32768 128 256 4500 4500 0xff 0xff
           lfuse 0 0 0 0 no 1 0 0 4500 4500 0x00 0x00
           hfuse 0 0 0 0 no 1 0 0 4500 4500 0x00 0x00
           efuse 0 0 0 0 no 1 0 0 4500 4500 0x00 0x00
           lock 0 0 0 0 no 1 0 0 4500 4500 0x00 0x00
           calibration 0 0 0 0 no 1 0 0 0 0 0x00 0x00
           signature 0 0 0 0 no 3 0 0 0 0 0x00 0x00

         Programmer Type : Arduino
         Description : Arduino
         Hardware Version: 2
         Firmware Version: 1.16
         Vtarget : 0.0 V
         Varef : 0.0 V
         Oscillator : Off
         SCK period : 0.1 us

avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.00s

avrdude: Device signature = 0x1e950f (probably m328p)
avrdude: reading input file "C:\Users\bugge\AppData\Local\Temp\arduino_build_953838/exportTest_01.ino.hex"
avrdude: writing flash (1960 bytes):

Writing | ################################################## | 100% 0.59s

avrdude: 1960 bytes of flash written
avrdude: verifying flash memory against C:\Users\bugge\AppData\Local\Temp\arduino_build_953838/exportTest_01.ino.hex:
avrdude: load data flash data from input file C:\Users\bugge\AppData\Local\Temp\arduino_build_953838/exportTest_01.ino.hex:
avrdude: input file C:\Users\bugge\AppData\Local\Temp\arduino_build_953838/exportTest_01.ino.hex contains 1960 bytes
avrdude: reading on-chip flash data:

Reading | ################################################## | 100% 0.45s

avrdude: verifying ...
avrdude: 1960 bytes of flash verified

avrdude done. Thank you.

```

---

<div class="post-metadata">

**Author:** ![gilshultz](https://avatars.discourse-cdn.com/v4/letter/g/67e7ee/32.png) [@gilshultz](https://forum.arduino.cc/u/gilshultz)\
**Post date:** [June 9, 2026, 4:34pm UTC](https://forum.arduino.cc/t/nano-clone-with-ch340-cannot-set-com-state/1447718/4 "2026-06-09T16:34:08Z")

</div>

> [@sterretje](#):
>
> IDE 1.8.19, IDE 2.x

I just built a new Linux system, Mint 22.2 and the IDE loaded and operated 'out of the box' No tweaks, just plugged it in and it works.
