# Nano Data Logging Shield Deek-Robot ID 8105 **URL:** \ **Category:** Storage\ **Created:** [February 10, 2018, 7:38am UTC](https://forum.arduino.cc/t/nano-data-logging-shield-deek-robot-id-8105/507398 "2018-02-10T07:38:30Z")\ **Posts on this page:** 12\ **Page:** 1
**Author:** ![Groeg](https://avatars.discourse-cdn.com/v4/letter/g/d6d6ee/32.png) [@Groeg](https://forum.arduino.cc/u/Groeg)\ **Post date:** [February 10, 2018, 7:38am UTC](https://forum.arduino.cc/t/nano-data-logging-shield-deek-robot-id-8105/507398/1 "2018-02-10T07:38:30Z")
![](https://europe1.discourse-cdn.com/arduino/original/4X/1/0/e/10e34ba509a8790791767fcbde988270ac2a2ae7.jpeg) I can't find any information about this shield. There are no info's at [deek-robot.com](http://deek-robot.com) and they don't answer questions. For the RTC clock and the mirco card, which pins are used on the Arduino nano ? There are also two led's placed on the shield. Are they connected to clock and micro card ? Thanks' ---
**Author:** ![Groeg](https://avatars.discourse-cdn.com/v4/letter/g/d6d6ee/32.png) [@Groeg](https://forum.arduino.cc/u/Groeg)\ **Post date:** [February 10, 2018, 8:21am UTC](https://forum.arduino.cc/t/nano-data-logging-shield-deek-robot-id-8105/507398/2 "2018-02-10T08:21:49Z")
Pin connection shield / arduino nano : SDA = pin18 / A4 - clock SCL = pin19 / A5 - clock CS / SS = pin10 / D10 - sd card Mosi = pin11 / D11 - sd card Miso = pin12 / D12 - sd card SCK = pin13 / D13 - sd card LED L1 and L2 are not connected to anything. They can be used by wiring them to the arduino for just any use. Can someone confirm that this is correct ? ---
**Author:** ![Gazzanz](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/gazzanz/32/261929_2.png) [@Gazzanz](https://forum.arduino.cc/u/Gazzanz)\ **Post date:** [May 12, 2018, 7:49am UTC](https://forum.arduino.cc/t/nano-data-logging-shield-deek-robot-id-8105/507398/3 "2018-05-12T07:49:09Z")
Hi Groeg, Yes these details are correct. I am having the same problem confirming the pin details and connections but have confirmed it is the same schematic as the V1.0 data logger sheild and just a diffent board layout to fit the nano ---
**Author:** ![Gazzanz](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/gazzanz/32/261929_2.png) [@Gazzanz](https://forum.arduino.cc/u/Gazzanz)\ **Post date:** [May 12, 2018, 7:56am UTC](https://forum.arduino.cc/t/nano-data-logging-shield-deek-robot-id-8105/507398/4 "2018-05-12T07:56:22Z")
---
**Author:** ![SaintSkinny](https://avatars.discourse-cdn.com/v4/letter/s/4af34b/32.png) [@SaintSkinny](https://forum.arduino.cc/u/SaintSkinny)\ **Post date:** [October 24, 2018, 11:09am UTC](https://forum.arduino.cc/t/nano-data-logging-shield-deek-robot-id-8105/507398/5 "2018-10-24T11:09:43Z")
I was considering this but went with the SD shield for the UNO, also made by Deek. Did you get the shield working? ---
**Author:** ![artbellson](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/artbellson/32/520693_2.png) [@artbellson](https://forum.arduino.cc/u/artbellson)\ **Post date:** [March 8, 2020, 2:43pm UTC](https://forum.arduino.cc/t/nano-data-logging-shield-deek-robot-id-8105/507398/6 "2020-03-08T14:43:25Z")
I did able to buy this shield but to no avail i cannot get the uSD card working. any suggestions or idea how to make it work? i got it working using external card reader but the built-in was not working. Error Details: Initializing SD card...Wiring is correct and a card is present. Card type: SD2 Could not find FAT16/FAT32 partition. Make sure you've formatted the card ---
**Author:** ![Gustavohbo](https://avatars.discourse-cdn.com/v4/letter/g/45deac/32.png) [@Gustavohbo](https://forum.arduino.cc/u/Gustavohbo)\ **Post date:** [March 10, 2020, 5:32pm UTC](https://forum.arduino.cc/t/nano-data-logging-shield-deek-robot-id-8105/507398/7 "2020-03-10T17:32:36Z")
Im having the same problem that you Did you figured out what was wrong with your shield? What is the kind (FAT16 or FAT32) and the size of the SD card that you are using? ---
**Author:** ![Nick\_Pyner](https://avatars.discourse-cdn.com/v4/letter/n/e8c25b/32.png) [@Nick\_Pyner](https://forum.arduino.cc/u/Nick_Pyner)\ **Post date:** [March 13, 2020, 6:52am UTC](https://forum.arduino.cc/t/nano-data-logging-shield-deek-robot-id-8105/507398/8 "2020-03-13T06:52:18Z")
Read the sticky about kosher formatting at the head of this forum. This may well apply to reply#5 as well. ---
**Author:** ![ieee488](https://avatars.discourse-cdn.com/v4/letter/i/d2c977/32.png) [@ieee488](https://forum.arduino.cc/u/ieee488)\ **Post date:** [March 13, 2020, 6:26pm UTC](https://forum.arduino.cc/t/nano-data-logging-shield-deek-robot-id-8105/507398/9 "2020-03-13T18:26:45Z")
> Nick\_Pyner: > Read the sticky about kosher formatting at the head of this forum. This may well apply to reply#5 as well. In his other post, he claims he used the official SD Formatter program. People apparently have trouble getting this particular board to work based on previous posts. ---
**Author:** ![ycordier](https://avatars.discourse-cdn.com/v4/letter/y/a88e57/32.png) [@ycordier](https://forum.arduino.cc/u/ycordier)\ **Post date:** [May 11, 2020, 7:17pm UTC](https://forum.arduino.cc/t/nano-data-logging-shield-deek-robot-id-8105/507398/10 "2020-05-11T19:17:35Z")
about deek robot 8150 nano shield on this card you could find a real time clock and a sd card on i2C and SPI protocol you could find the two libraries to manage this card on the site > **[altituduino](http://altituduino.com)** > > arduino processin mecanical software librairies lcd serial display ucam ... download-\>arduino regards ---
**Author:** ![sakiwi](https://avatars.discourse-cdn.com/v4/letter/s/ce7236/32.png) [@sakiwi](https://forum.arduino.cc/u/sakiwi)\ **Post date:** [July 28, 2020, 7:36am UTC](https://forum.arduino.cc/t/nano-data-logging-shield-deek-robot-id-8105/507398/11 "2020-07-28T07:36:55Z")
I bought one of these and came across the following .ino file for the data logger. This may be of help to you. [http://kaptery.com/files/documents/nanodataloggerbmpv2.ino](http://kaptery.com/files/documents/nanodataloggerbmpv2.ino) ---
**Author:** ![system](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/system/32/1140315_2.png) [@system](https://forum.arduino.cc/u/system)\ **Post date:** [May 6, 2021, 4:31pm UTC](https://forum.arduino.cc/t/nano-data-logging-shield-deek-robot-id-8105/507398/12 "2021-05-06T16:31:39Z")