i'm at my wits end. After a long and tedious build of the "all things crash" TR I copter QSC I am at the point of loading the 1.6 sketch onto my arduino board. I seem to be able to flash the sketch onto my arduino but when it comes time to loading the configurator 1.6. it's like it can't see the sketch flashed onto arduino and I get no response. I click on the correct com port and press start and nothing happens. I have tried everything, I bought a new arduino board and tried to get the configurator to see the arduino with the flash sketch with no wires attached, except the USB FTDI cable and I still get no results from the configurator. I am successful at running the blink sketch even though I'm using in FTDI adapter that is only 3.3 V instead of the 5 V that recommends. I have checked with Spark fun to see if this could be the problem that maybe I need to get a 5 V FTDI adapter they said probably not, if I'm getting a successful flash of the blink program, you're probably getting a successful flash of the 1.6 sketch, but for some reason the configurator is just not responding.I've tried all the different versions of the adrenal sketch all the way up to 1.9 I've tried the different versions of the configurator all the way up to 1.9. Is there another brand of configurator I can try? Can anybody help me. I have nowhere to go from here. Needless to say I've invested a lot of time and effort and money and I'm at a dead-end. Any suggestions would be appreciated. a call to my cell phone with suggestions would be appreciated 678.886.5800, my name is Bill.
Many thanks in advance