Need help wiring a Siemens TC35 GSM board to Arduino Board.

I have a Siemens TC35 GSM board i need to wire up to a Arduino Uno compatible board (See Picture Below). Do i have to use the RS232 connector to access it or can i do it thru the jumper wires or terminals. It would be nice if someone could post a pictorial wiring diagram or photo. The Arduino Board is a Salid Arduino Uno board with built in GPS.

Any help would be great

Thanks a bunch
George

High Res Photo of Both Boards
https://sites.google.com/a/datapointcommunications.com/data-point-communications/home/both.jpg

High Res Photo of GSM Board
https://sites.google.com/a/datapointcommunications.com/data-point-communications/home/gsm.jpg

High Res Photo of the Arduino + GPS Board
https://sites.google.com/a/datapointcommunications.com/data-point-communications/home/arduino.jpg

WP_000417small.jpg

If you posted a link, instead of a blurry picture, we could provide some real help.

Thanks for the input Paul ! I've added links to the post

High Res Photo of Both Boards http://dl.dropbox.com/u/6339586/both.jpg

High Res Photo of GSM Board http://dl.dropbox.com/u/6339586/gsm.jpg

High Res Photo of the Arduino + GPS Board http://dl.dropbox.com/u/6339586/arduino.jpg

Photos are nearly useless. There are no data sheets attached to the photos. You bought the boards somewhere. Post a link.

Thanks for the input, it's hard being a newb!

George

GPS Manual http://www.cutedigi.com/pub/GPS/SR-92_User%20Manual_EN.pdf\

Arduino with GPS Schematic http://dl.dropbox.com/u/6339586/gps%20schematic.pdf

GSM Schematic http://www.yourportablelab.com/downloads/schematics/TC35SCH+PCB.pdf

TC35 Manual (GSM) http://www.yourportablelab.com/downloads/schematics/TC35_Manual.pdf

Did you succeed? I'm working now with Siemens MC39i and I must say it's a nightmare!

do you have the wiring conection to wire the seimens tc35 board to the arduino uno board please