Here is the 33 IOT with the debugger soldered and glued together. I used Popsicle stick pieces and hot glue to hold it all together. Wiring was the real booger though. The smallest wire I had was 24 gauge and you can see the clunky insulation on the orange and blue wires, that is several times thicker than the wire. Got it done though with no pads lifted.
I was about ready to throw the whole thing in the trash as it would not connect even though the board was running. The IDE did not even to offer a PORT choice. Checked comm ports and saw nothing. Duh me! I had two USB cables with no data lines in them. Never suspected Motorola would ship such junk.
The debugger works great. No muss, no fuss, just plug and play. Only problem is that I often get a message that no device was found. So I unplug and replug, restart the IDE, etc. Haven't found the sure fire method yet.
