NRF 24L01 ,sending and receiving the array of long data

[MOSHAYEDI]

hi
i want to send a array of data which is as long as 20 number with my NRF module
the data which should be send are stored in

int myArray1[20]={};
int myArray2[20]={};

there is two problem with this code

1. is the coming data just count up to 16th one
2. just one of arrays are received
   please see the attached picture

any kindly help is appreciated

this is my Send section code

#include <SPI.h>    
#include<nRF24L01.h> 
#include<RF24.h> 
#define CE_PIN 9
#define CSN_PIN 10

const uint64_t pipe=0xE8E8F0F0E1LL;       
    RF24 radio(CE_PIN,CSN_PIN); 
int i;
  int data[500];
  int myArray1[20]={255,233,239,246,244,232,220,211,181,133,110,150,170,140,113,84,71,84,92,126};
 int myArray2[20]={157,224,248,253,244,224,200,188,174,157,190,220,208,165,114,80,62,80,87,125};  
 
 void setup(){
   Serial.begin(9600);   
  radio.begin();      
   radio.openWritingPipe(pipe);    
}
void loop(){
  for (i = 0; i < 20; i = i + 1) {
   data[i]=myArray1[i];
   data[i]=myArray2[i];
   radio.write(data,sizeof(data));
  delay(5000);
  }
  
}

this is my receiver code

#include <SPI.h>               
#include<nRF24L01.h>         
#include<RF24.h>   
#define CE_PIN 9
#define CSN_PIN 10

const uint64_t pipe=0xE8E8F0F0E1LL; 
int i; 
         
RF24 radio(CE_PIN,CSN_PIN);                 
    int  data[600];                              
    void setup(){
      Serial.begin(9600);                         
      radio.begin();                            
      radio.openReadingPipe(1,pipe);
      radio.startListening();                  
    }
    void loop(){ 
      if (radio.available()){ 

         Serial.println("data come "); 
    bool done=false;
    while(!done)
     {
       for (i = 0; i < 25; i = i + 1) {
    radio.read(data,sizeof(data));    
    Serial.print(i);
    Serial.print(":"); 
    Serial.print("DATA1:");Serial.print(data[i]);
    Serial.print(",");
    Serial.print("DATA2:");Serial.println(data[i]);
    
    Serial.println("------------------------------");

             if  (i>18){
       Serial.println("STOP");
       }
                     
    delay(5000); 
       }             
       }
    }
    else {
      Serial.println("No radio available");           
      delay(1000);                                     
    }
    }