NRF24L01 + OLED display error (SOLVED)

Hello.

I speaking little english.
My project is chat serial terminal to oled with nrf24l01. just nrf24l01 working, just oled working. nrf + oled; oled not working.

My code;

#include <SPI.h>
#include <nRF24L01p.h>
#include <Adafruit_GFX.h>
#include <Adafruit_SSD1306.h>

Adafruit_SSD1306 display;

nRF24L01p receiver(7,8);//CSN,CE

void setup(){
display.begin(SSD1306_SWITCHCAPVCC, 0x3C);
display.clearDisplay();
delay(150);
Serial.begin(115200);
SPI.begin();
SPI.setBitOrder(MSBFIRST);
receiver.channel(90);
receiver.RXaddress("Artur");
receiver.init();
}

String message;

void loop(){
if(receiver.available()){
receiver.read();
receiver.rxPL(message);
Serial.println(message);
message="";
display.setTextColor(WHITE);
display.setTextSize(1);
display.setCursor(0,0);
display.print(message);
}
}

looks like you have not specified the pins for the adafruit oled?

#include <SPI.h>
#include <Wire.h>
#include <Adafruit_GFX.h>
#include <Adafruit_SSD1306.h>

// If using software SPI (the default case):
#define OLED_MOSI 9
#define OLED_CLK 10
#define OLED_DC 11
#define OLED_CS 12
#define OLED_RESET 13
Adafruit_SSD1306 display(OLED_MOSI, OLED_CLK, OLED_DC, OLED_RESET, OLED_CS);

/* Uncomment this block to use hardware SPI
#define OLED_DC 6
#define OLED_CS 7
#define OLED_RESET 8
Adafruit_SSD1306 display(OLED_DC, OLED_RESET, OLED_CS);
*/

#define LOGO16_GLCD_HEIGHT 16
#define LOGO16_GLCD_WIDTH 16

The above is the bare minimum as far as i was aware? (minus the gfx library)

Kronbot:
looks like you have not specified the pins for the adafruit oled?

#include <SPI.h>
#include <Wire.h>
#include <Adafruit_GFX.h>
#include <Adafruit_SSD1306.h>

// If using software SPI (the default case):
#define OLED_MOSI 9
#define OLED_CLK 10
#define OLED_DC 11
#define OLED_CS 12
#define OLED_RESET 13
Adafruit_SSD1306 display(OLED_MOSI, OLED_CLK, OLED_DC, OLED_RESET, OLED_CS);

/* Uncomment this block to use hardware SPI
#define OLED_DC 6
#define OLED_CS 7
#define OLED_RESET 8
Adafruit_SSD1306 display(OLED_DC, OLED_RESET, OLED_CS);
*/

#define LOGO16_GLCD_HEIGHT 16
#define LOGO16_GLCD_WIDTH 16

The above is the bare minimum as far as i was aware? (minus the gfx library)

hello. thank you for answering. But my oled display is I2C. SDA,SCL

please help me ?

Now running.

But with this OLED library;