NRF24L01 RF24Network radio.PowerUp and radio.PowerDown

Hi, I’m having trouble with the NRF24L01 modules working in the network. I wanted to disable the module when idle with the commands radio.powerDown() and radio.powerUP(),
Unless the radio.powerDown () command works, but not after the radio.powerUP () command. For simplicity, I only made such a code and connected an ammeter. Without these commands there is communication between the modules and the whole program works. Only after sleeping, the module won’t get up.

#include <RF24Network.h>
#include <RF24.h>
#include <SPI.h>
 
 
 
RF24 radio(9, 10);               // nRF24L01 (CE,CSN)
 
 
RF24Network network(radio);      // Include the radio in the network
 
const uint16_t this_node = 02;   // Address of our node in Octal format ( 04,031, etc)
const uint16_t master00 = 00;    // Address of the other node in Octal format
 
 
void setup() {
 
  SPI.begin();
  radio.begin();
  network.begin(90, this_node); //(channel, node address)
  radio.setDataRate(RF24_2MBPS);
 
}
void loop() {

radio.powerDown();
delay(5000);
radio.powerUp();
delay(5000);
}

Thank you for any suggestions.