OTA problem on Wemos D1


I have problem when uploading sketch to Wemos D1 via OTA.
When uploading Basic OTA via COM everyfing is OK.
In my router i can see Wimos on attached devices list.
But when in Arduino IDE I switch PORT to I can’t upload sketch.

In attachements there are screenshots.

What am I doing wrong?

after serial upload you must reset the board for OTA upload to work

I did it, and try to load sketch Basic OTA by OTA on, but still:

11:44:48 [ERROR]: No response from device
11:44:48 [ERROR]: No response from device