Yes, I had both the adapter and another project (board for a Nexus 7 docking station using the loading pins) made at Seeedstudio. Worked very well, took around 4 weeks and the quality is fine.
I did the design in KiCAD and indeed I could use some feedback: Both my orders came without solder masks. In a Gerber viewer, the layers seem to be empty, despite the fact that I think I added them in KiCAD. So, I would appreciate if you or someone else could point me to my error.
I added both project, in case someone is interested.
Known issues of the Nexus board:
- Components would be better placed on the other side, as they now are positioned on the side where the Nexus will dock
- Holes for resistors etc. are only 2,54mm apart, so regular components will not fit very well. Should be replaced with SMD components or moved apart. For us, this was no problem, as we do not use the audio part and just put the circuits in for completeness
- Board could use some holes for screws.
BreadboardAdapter.zip (90.3 KB)
Nexus7Dock.zip (50.2 KB)