CrossRoads:
Edit:Net Classes, select a minimum width for traces.
Signals, at least 10mil. Clearance 10mil. Drill, 12 mil.
Power, at least 20mil. Clearance 10mil,. Drill 24 mil. If high current is expected, then 32 or even 40 mil.
Can't tell what the parts are - add a 0.1uC cap to the Vcc pin of each powered device to Gnd.Once done with that, select File:Switch to Board for the board view to layout your components.
Thank you Mr CrossRoads.
i'll be using a 595 chip on each socket, 2 of them drive the segments of 2 4x digits 7s displays, and the other one their digits.
I made some tests with eagle and the autoroute function leaves some tracks without drawing.
I don't have access to the software right now but I think status bar shows something like "90% done"
Does this happen because lack of space? (there is no visible error message)
I'm doing it single layer since It's my first try and want to keep it as simple as possible.