# PCB Manufacture recommendation **URL:** \ **Category:** General Electronics\ **Created:** [June 3, 2017, 7:45am UTC](https://forum.arduino.cc/t/pcb-manufacture-recommendation/462581 "2017-06-03T07:45:37Z")\ **Posts on this page:** 9\ **Page:** 1
**Author:** ![figoarzaki](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/figoarzaki/32/1180092_2.png) [@figoarzaki](https://forum.arduino.cc/u/figoarzaki)\ **Post date:** [June 3, 2017, 7:45am UTC](https://forum.arduino.cc/t/pcb-manufacture-recommendation/462581/1 "2017-06-03T07:45:37Z")
Hello there I've been searching for pcb manufacture to create my pcb, but i did'nt find any pcb manufacture that use free shipping. seeeds is good, checkin price for 10pcs 2layer pcb, it's so cheap!, but the shipping cost not! so i need your recommendation for prototyping my pcb ---
**Author:** ![MarkDerbyshire](https://avatars.discourse-cdn.com/v4/letter/m/54ee81/32.png) [@MarkDerbyshire](https://forum.arduino.cc/u/MarkDerbyshire)\ **Post date:** [June 3, 2017, 9:36am UTC](https://forum.arduino.cc/t/pcb-manufacture-recommendation/462581/2 "2017-06-03T09:36:38Z")
I have used these in the past. Very good to the UK [OSH Park](https://oshpark.com/) ---
**Author:** ![EdsArduino](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/edsarduino/32/263677_2.png) [@EdsArduino](https://forum.arduino.cc/u/EdsArduino)\ **Post date:** [June 3, 2017, 11:33am UTC](https://forum.arduino.cc/t/pcb-manufacture-recommendation/462581/3 "2017-06-03T11:33:51Z")
I've used this company before, they provide free delivery within mainland UK and are fairly cheap [http://www.newburyelectronics.co.uk/pcbs-in-volume/](http://www.newburyelectronics.co.uk/pcbs-in-volume/) ---
**Author:** ![DrAzzy](https://avatars.discourse-cdn.com/v4/letter/d/eb9ed0/32.png) [@DrAzzy](https://forum.arduino.cc/u/DrAzzy)\ **Post date:** [June 3, 2017, 12:09pm UTC](https://forum.arduino.cc/t/pcb-manufacture-recommendation/462581/4 "2017-06-03T12:09:23Z")
I use DirtyPCBs most of the time. Have also used PCBWay without problems. ---
**Author:** ![GilchristT](https://avatars.discourse-cdn.com/v4/letter/g/848f3c/32.png) [@GilchristT](https://forum.arduino.cc/u/GilchristT)\ **Post date:** [June 5, 2017, 10:40am UTC](https://forum.arduino.cc/t/pcb-manufacture-recommendation/462581/5 "2017-06-05T10:40:31Z")
Elecrow have been my go-to board manufacturer for the last few years and I'd recommend them. For the last few boards I've used EasyEDA as they're cheaper for ENIG. The quality of the silkscreen is slightly worse than Elecrow but that's relative, it's still perfectly acceptable quality, With DHL shipping I tend to get the boards within 7 days of ordering (I'm in the UK). I'd also note that both Elecrow and EasyEDA made have made errors in the stencils I've ordered but I wouldn't blame them for it as I have some odd requirements and it's difficult to explain them properly. Both recitified the errors and shipped new stencils immediately which I think reflects well on them. ---
**Author:** ![gutbag](https://avatars.discourse-cdn.com/v4/letter/g/ba9def/32.png) [@gutbag](https://forum.arduino.cc/u/gutbag)\ **Post date:** [June 5, 2017, 12:21pm UTC](https://forum.arduino.cc/t/pcb-manufacture-recommendation/462581/6 "2017-06-05T12:21:08Z")
You don't say where you are but as other answers refer to the UK (where I am)... I've used [Ragworm](http://ragworm.eu/)several times, with good results. Usually takes a couple of weeks for delivery. I haven't used anyone else so I can claim they're better, though. ---
**Author:** ![Budvar10](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/budvar10/32/215868_2.png) [@Budvar10](https://forum.arduino.cc/u/Budvar10)\ **Post date:** [June 6, 2017, 7:11am UTC](https://forum.arduino.cc/t/pcb-manufacture-recommendation/462581/7 "2017-06-06T07:11:46Z")
Maybe a photo of your PCBs could be helpful to imagine the quality of fabrication eventually another details like dimensions, price and time. Here is my elder experience with Itead. ![2d6e7e20a037ec972f32644b5d964875761d7430.jpg](https://europe1.discourse-cdn.com/arduino/original/4X/8/a/1/8a1ca0807a2c79dbf4367236629bde9a5507483f.jpeg) Shipping is not for free so it is probably out of figoarzaki's (OP) interest. ---
**Author:** ![CrossRoads](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/crossroads/32/214033_2.png) [@CrossRoads](https://forum.arduino.cc/u/CrossRoads)\ **Post date:** [June 6, 2017, 8:22pm UTC](https://forum.arduino.cc/t/pcb-manufacture-recommendation/462581/8 "2017-06-06T20:22:30Z")
Still, high quality boards with iteadstudio. Many examples at my website. [http://crossroadsfencing.com/BobuinoRev17/](http://crossroadsfencing.com/BobuinoRev17/) ---
**Author:** ![system](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/system/32/1140315_2.png) [@system](https://forum.arduino.cc/u/system)\ **Post date:** [May 6, 2021, 2:06am UTC](https://forum.arduino.cc/t/pcb-manufacture-recommendation/462581/9 "2021-05-06T02:06:18Z")
Closed on May 6, 2021, 2:06am UTC