But you did attach the code not as a code-section.
Read this tutorial how to attach code as a code-section .
Hi newcomer,
This thread wants to show you how you can speed-up getting helpful answers with small effort.
If you manage at least to post this way. You have the sympathy of the experienced users.
If you are willing to invest another 20 minutes these 20 minutes extra-time will save you a minimum of 200 minutes to finish your project.
always
post your full sketch. As a
code-section
from the very first to the very last line
A code-section has a small height => keeps your posting "short" but…
and as a general hint:
If you want to speed up finishing your project
now you should really take 20 minutes of your real expensive time where each minute is worth one million dollars
and finally read
See also FAQ - Arduino Forum for general rules on forum behaviour and etiquette.
Hello,
Welcome to the Arduino Forum.
This guide explains how to get the best out of this forum. Please read and follow the instructions below.
Being new here you might think this is having rules for the sake of rules, but that is not the case. If you don’t follow the guidelines all that happens is there is a long exchange of posts while we try to get you to tell us what we need in order to help you, which is fru…
best regards Stefan