Power for 240 WS2811


I've 4 x 5 metre strings of WS2811's. These are the 12v verity with 60 LEDs/metre.

What power supply would i need to power these (noting I'd have to inject power into each string.)

Im after the enclosed type of power pack, preferable IP67 but this is not essential. (not the open type with screw terminals)

Thank you


About 15A, but you may want to leave a little bit of headroom. You can get away with less if you never use pure white, but that's not really a good way to calculate.

Thank you :slight_smile: