I shorted 10V and ground by mistake at the 10V input (connected 10V to the ground there) :(. Is there any other way I can power up the board? The USB still works so I can still program the controller. Is there a way I can give a 5V directly to power up just the chip after programming? Also, which c…

Powering up the Arduino Uno

Topic		Replies	Views
Accidentally ran 12vdc into 5v out pin. Did I kill my uno? IDE 1.x	5	4930	May 5, 2021
Mr +5v meets Mr Gnd Troubleshooting	12	3469	May 6, 2021
Arduino Fried - hooked wrong polarity IDE 1.x	3	1592	May 5, 2021
Possible to Repair? Greater than 5V applied to 5V pin (Arduino Uno) IDE 1.x	3	3217	May 5, 2021
Power IDE 1.x	10	980	May 5, 2021