Problem combining 2 sketches

I tried combining these two sketches but the two sensors are competing with each other. How can I solve this problem?

This is the code for the smoke sensor:
#include <TFT.h>

int smokeA0 = A0;

int sensorThres = 200;

void setup () {
pinMode (smokeA0, INPUT);
pinMode (13, OUTPUT);
Serial.begin(9600);
}

void loop() {
int analogSensor = analogRead(smokeA0);

Serial.print("PinA0: ");
Serial.println(analogSensor);

if (analogSensor > sensorThres)
{
digitalWrite(13,HIGH);
delay(50);
digitalWrite(13,LOW);
delay(50);;
tone(8,1000,1000);
}
}

This is the code for the Human Touch Sensor with servo motor

const int servoPin = 7;
const int touchPin = 10;
int angle =80;
int angleStep =10;

#include <Servo.h>

Servo myservo;
void setup() {
Serial.begin(9600);
myservo.attach(7);
pinMode(servoPin, OUTPUT);
pinMode(touchPin, INPUT);
Serial.println();
}

void loop() {
while(digitalRead(2) == LOW){

int touchState = digitalRead(touchPin);

if (touchState == HIGH) {
angle = angle + angleStep;

if (angle <= 0 || angle >= 180) {
angleStep = -angleStep;
}
myservo.write(angle);
Serial.print(“Moved to: “);
Serial.print(angle);
Serial.println(” degree”);
delay(10);
}

}
}

And this is what I come up when I combined this two sketches:
#include <TFT.h>

int smokeA0 = A0;

int sensorThres = 200;

const int servoPin = 7;
const int touchPin = 10;
int angle =80;
int angleStep =10;

#include <Servo.h>

Servo myservo;

void setup () {
pinMode (smokeA0, INPUT);
pinMode (13, OUTPUT);
Serial.begin(9600);
{
myservo.attach(7);
pinMode(servoPin, OUTPUT);
pinMode(touchPin, INPUT);
Serial.println();
}
}
void loop() {
int analogSensor = analogRead(smokeA0);
Serial.print("PinA0: ");
Serial.println(analogSensor);

if (analogSensor > sensorThres)
{
digitalWrite(13,HIGH);
delay(50);
digitalWrite(13,LOW);
delay(50);;
tone(8,1000,1000);
}
{
int touchState = digitalRead(touchPin);
if (touchState == HIGH) {
angle = angle + angleStep;

if (angle <= 0 || angle >= 180) {
angleStep = -angleStep;
}
myservo.write(angle);
Serial.print(“Moved to: “);
Serial.print(angle);
Serial.println(” degree”);
delay(10);
}
}
}

This has been split from a seemingly unrelated topic

Please do not hijack threads and certainly don't do it multiple times as you have or you risk banning from the forum for a period

but the two sensors are competing with each other.

what do you mean by "competing"?

Servo.h and tone() don't play well together. There are several alternative versions of both that you could try instead e.g NewTone.h or ServoTimer2.h

Steve