The following applies to Arduino -1.0 on Linux(64 bit). I ported the IDE to run on an a atmega2561 in an STK500/STK501 dev board. (modified pins_arduino.h and boards.txt) The bootloader is the STK500v2 at 115200 with a 16mhz clock. I set the fuses using AVR studio and a jtagmkII (on a windows machi…

Problem uploading sketch in verify phase

Coding_Badly April 25, 2012, 8:33pm 4

Does verify work from the IDE if you enable verbose output?

Topic		Replies	Views
Avrdude verification error 3rd Party Boards	4	3245	May 6, 2021
Better avrdude management Bugs & Suggestions	1	2387	May 6, 2021
ATmega2561 bootloader 3rd Party Boards	2	2516	May 6, 2021
2560 & 16U2, avrdude verification error IDE 1.x	1	850	May 5, 2021
Upload from command line Troubleshooting	6	2500	May 6, 2021