Hi!
I buy several months ago a Iteaduino Tiny http://imall.iteadstudio.com/im130615003.html , i need now to use this board urgently !
I read the Wiki and download DigisparkArduino-Win32-1.0.4-May19 folder.
I install with success the DigisparkWindowsDriver (Windows Seven 64Bits)
I use the arduino program into Digispark-Arduino-1.0.4 folder.
I program avr to DigiSpark(Tiny Core) at COM16 and DigisPark programmer.
I try to upload a exemple sketch and the avr ask to plug the board.
I plug Iteaduino Tiny, green led is on and red led is blink.
I obtain every time this type of error :
Taille binaire du croquis : 4 508 octets (d'un max de 6 012 octets)
Running Digispark Uploader...
Plug in device now... (will timeout in 60 seconds)
Please plug in the device ...
Press CTRL+C to terminate the program.
Device is found!
connecting: 16% complete
connecting: 22% complete
connecting: 28% complete
connecting: 33% complete
Available space for user application: 6012 bytes
Suggested sleep time between sending pages: 8ms
Whole page count: 94
Erase function sleep duration: 752ms
parsing: 50% complete
Erasing the memory ...
erasing: 55% complete
erasing: 60% complete
erasing: 65% complete
Starting to upload ...Abort mission! An error has occured ...
Please unplug the device and restart the program.
Thanks for resolution.
Bye