problem with upload code for arduino

hi …
what that mean :o :o
when i upload code with ide arduino the code is uploaded without error but does not executable the code
and this is appear.

system wide configuration file is "E:\Arduino\hardware\tools\avr/etc/avrdude.conf"

 Using Port       : COM1
Using Programmer  : arduino
 Overriding Baud Rate      : 57600
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x1c
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x1c
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x1c
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x1c
avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x1c
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x1c
avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x1c
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x1c
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x1c
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x1c

avrdude done.  Thank you.

.

:frowning: