Problemas con un "arduino" uno R3 generico

Hola

Hace ya un par de semanas compre un arduino generico y estoy teniendo este problema, no es problema de COM ni de cable.

avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x30 avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x20 avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x30 avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x20 avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x30 avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x20 avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x30 avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x20 avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x30 avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x20 Ha ocurrido un error mientras se enviaba el sketch

Me gustaria saber si existe alguna forma de solucionarlo o talvez si alguien sabe de algun otro programa para arduinos genericos, seria de muchisima ayuda.