# Problems with esp32-s3-cam

**URL:** <https://forum.arduino.cc/t/problems-with-esp32-s3-cam/1418884>\
**Category:** 3rd Party Boards\
**Created:** [December 10, 2025, 7:17am UTC](https://forum.arduino.cc/t/problems-with-esp32-s3-cam/1418884 "2025-12-10T07:17:15Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![ccfcds](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/ccfcds/32/1249716_2.png) [@ccfcds](https://forum.arduino.cc/u/ccfcds)\
**Post date:** [December 10, 2025, 7:17am UTC](https://forum.arduino.cc/t/problems-with-esp32-s3-cam/1418884/1 "2025-12-10T07:17:15Z")

</div>

When I run the Arduino sample program with the ESP32-S3-CAM, there is no output in the serial monitor.  
And when I pressed the reset button, the output is:

```arduino
ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0x1 (POWERON),boot:0x8 (SPI_FAST_FLASH_BOOT)
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce2820,len:0x116c
load:0x403c8700,len:0xc2c
load:0x403cb700,len:0x3108
entry 0x403c88b8

```

It was supposed to be the ip so I can have access to the camera on my computer.

 ![cc352fe1d0c0c94f2e8166a6dcde7159](https://europe1.discourse-cdn.com/arduino/original/4X/f/9/e/f9e0dcae9009a278488add75139feeb8aa251cd1.png)  
 ![1b66169ac5edc3468bda7d614d31a96b](https://europe1.discourse-cdn.com/arduino/original/4X/1/0/d/10ddcb929541c55c7c3c38b5fa0bbe6dd3f05409.png)  
 ![02f63114c9ecdbca5139bf3b6b158482](https://europe1.discourse-cdn.com/arduino/original/4X/b/7/2/b728ed3b26ce8b65a4b7fa9520fb161b5fabd350.png)

---

<div class="post-metadata">

**Author:** ![sterretje](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/sterretje/32/391294_2.png) [@sterretje](https://forum.arduino.cc/u/sterretje)\
**Post date:** [December 10, 2025, 7:23am UTC](https://forum.arduino.cc/t/problems-with-esp32-s3-cam/1418884/2 "2025-12-10T07:23:32Z")

</div>

Your topic does not relate to the _Arduino Nano ESP32_ board en therefore has been moved to a more suitable category of the forum.

---

<div class="post-metadata">

**Author:** ![srnet](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/srnet/32/238868_2.png) [@srnet](https://forum.arduino.cc/u/srnet)\
**Post date:** [December 10, 2025, 8:47am UTC](https://forum.arduino.cc/t/problems-with-esp32-s3-cam/1418884/3 "2025-12-10T08:47:18Z")

</div>

If your ESP32S3 board has two USB ports, try programming with the other one.

---

<div class="post-metadata">

**Author:** ![J-M-L](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/j-m-l/32/766245_2.png) [@J-M-L](https://forum.arduino.cc/u/J-M-L)\
**Post date:** [December 10, 2025, 8:57am UTC](https://forum.arduino.cc/t/problems-with-esp32-s3-cam/1418884/4 "2025-12-10T08:57:18Z")

</div>

I don't know that module but Is the ESP32-S3-EYE from Espressif the same (or fully compatible) as your ESP32-S3-CAM ?

---

<div class="post-metadata">

**Author:** ![system](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/system/32/1140315_2.png) [@system](https://forum.arduino.cc/u/system)\
**Post date:** [June 8, 2026, 8:58am UTC](https://forum.arduino.cc/t/problems-with-esp32-s3-cam/1418884/5 "2026-06-08T08:58:06Z")

</div>

This topic was automatically closed 180 days after the last reply. New replies are no longer allowed.