Programming problem for remote control

Projects Programming
5

Paul thanks for the help! As I have arreclar!
Now is perfect XD
Thus as has been:

#include <Servo.h>
#include <IRremote.h>

Servo servo1A;
Servo servo1B;
Servo servo1C;

int receiver = 11;
IRrecv irrecv(receiver);
decode_results results;

int g90 = 90;
int posIN;

void setup()
{
  servo1A.attach(4);
  servo1B.attach(5);
  servo1C.attach(6);
  
  posIN = g90;
  
  Serial.begin(9600);
  
  irrecv.enableIRIn();
  
  Serial.println("AH-AX/22:");
  Serial.println("clicar 2 per iniciar seq. pota 1");
}

void loop()
{
  if (irrecv.decode(&results))
  {
       
  if(results.value == 0xFFF906)
  {
      servo1A.write(90);
      servo1B.write(90);
      servo1C.write(90);
      delay(300);
  
      //servo1A.write(90);
      servo1B.write(65);
      servo1C.write(25);
      delay(300);
  
      //servo1A.write(90);
      servo1B.write(25);
      servo1C.write(65);
      delay(300);
  }
  
  else
  {
  Serial.println("no hi ha ordre");
  }
  
  irrecv.resume(); // receive the next value
  }
}