PS3 controller via USB Mini Host by Hobbytronics

I am using Arduino Micro with USB mini host by Hobbytronics.

After a while I finally got some data out of it, but it rumbles softly all the time when connected to the system.

#include <SoftwareSerial.h>
SoftwareSerial mySerial(10,11);

void setup() {
  // put your setup code here, to run once:
  Serial.begin(9600);
  while(!Serial){}

  mySerial.begin(9600);
      Serial.println("Running");

}

void loop() {
  // put your main code here, to run repeatedly:
  while(Serial.available()>0)
  {
    char in = Serial.read();
    mySerial.write(in);
    //Written++;
  }

  while(mySerial.available()>0)
  {
    char out=mySerial.read();
    Serial.write(out);
    //Written++;
  }

  }

Parts I use are:
Arduino Micro
http://www.hobbytronics.co.uk/usb-host-mini

Built-in serial is used for connection to computer and software serial is connected to mini host.

In Serial mode I get data out of the controller as necessary, but when I try to use the hex-example it just gives out 0 0 0 0 0 when it should give out info of the controller.

How am I screwing this up?

I’m having the exact same trouble.
My controller won’t stop rumbling and I can’t read any data from the controller.

Have you had any luck with this?