# Questions/comments about Between Delay and State Machine - Commutable Delay Tutorial

**URL:** <https://forum.arduino.cc/t/questions-comments-about-between-delay-and-state-machine-commutable-delay-tutorial/1059768>\
**Category:** LEDs and Multiplexing\
**Created:** [November 30, 2022, 1:30pm UTC](https://forum.arduino.cc/t/questions-comments-about-between-delay-and-state-machine-commutable-delay-tutorial/1059768 "2022-11-30T13:30:40Z")\
**Posts on this page:** 1\
**Showing post:** 9

<div class="post-metadata">

**Author:** ![dougp](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/dougp/32/238908_2.png) [@dougp](https://forum.arduino.cc/u/dougp)\
**Post date:** [November 30, 2022, 5:33pm UTC](https://forum.arduino.cc/t/questions-comments-about-between-delay-and-state-machine-commutable-delay-tutorial/1059768/9 "2022-11-30T17:33:48Z")

</div>

> [@Between Delay and State Machine - Commutable Delay](https://forum.arduino.cc/t/between-delay-and-state-machine-commutable-delay/1059712/1):
>
> If for some totally insane reason you want to detect a pin that is wired up incorrectly, that is with an external pull down resistor and the button connecting the pin input to the positive processor supply voltage (note **NOT THE INPUT VOLTAGE TO THE INTERNAL REGULATOR** ) that will be 5V or 3V3 depending on the processor, then in the setup function to be set to a :- pinMode(changePin, INPUT) and pass a HIGH commuteState when calling both the commutableCatchPin() and commutableDelayPin() functions.

This single sentence seems rather dense - to me.

---

_[View the full topic](https://forum.arduino.cc/t/questions-comments-about-between-delay-and-state-machine-commutable-delay-tutorial/1059768)._
