Radio issue

Hi

I am using Arduino Nano to relay data through NRF24L01 module. When I run below code it get stuck. Plz ref to serial monitor screenshot and help me understand why I am not able to send data.

#include #include "RF24.h" #include //const uint64_t pipes[2] = {0xABCDABCD71LL,0x544d52687CLL}; // Radio pipe addresses for the 2 nodes to communicate.

RF24 radio(9,10);

struct dataStruct{
unsigned long _micros;
float value;
}myData;

void setup(void)
{
Serial.begin(115200);
radio.begin();
radio.setPALevel(RF24_PA_MAX);
radio.setChannel(0x76);
//radio.setDataRate(RF24_1MBPS);
//radio.setPayloadSize(32);
radio.setAutoAck(1); // Ensure autoACK is enabled
//radio.setRetries(15,15);
radio.setCRCLength(RF24_CRC_8);
//radio.openWritingPipe(pipes[0]);
radio.openWritingPipe(0xF0F0F0F0E1LL);
radio.enableDynamicPayloads();
radio.powerUp();
}

void loop(void)
{
myData.value = 1.22;
Serial.println(“Now sending”);
myData._micros = micros();
if (radio.available())
{
radio.stopListening();
radio.write(&myData,sizeof(&myData));
Serial.print(F(“Date Sent :”));
Serial.println(myData.value);
}
else
{
Serial.println(“Radio is not active”);
}
delay(5000);
}

Please use code tags duplicate deleted