Hi OldSteve
Once again thanks for answering my questions. So the most straight forward option would be to remove the David Mellis Core and replace it with the DrAzzy Core? Am I correct in thinking that the uploading process is the same?
Alternatively, if I stick with the David Mellis Core I need to work out whether setting analogReference(INTERNAL); sets the analog reference voltage to 1.1V or 2.56V. I strongly suspect it's 1.1V.
I'd love to know what analogReference(6); actually does? Looking at the ATtiny45 datasheet, specifically page 134, table 17-3, second last row, if Voltage Reference Selection Bits 2 and 1 are set high and Voltage Reference Selection Bit is set low you can select 2.56V. I wonder whether inserting the number 6 in analogReference(6) actually does this? 110 binary = 6 decimal?
Cheers
Jase 