# Reading multiple DS18B20 sensors

**URL:** <https://forum.arduino.cc/t/reading-multiple-ds18b20-sensors/1166149>\
**Category:** Sensors\
**Created:** [September 7, 2023, 1:44pm UTC](https://forum.arduino.cc/t/reading-multiple-ds18b20-sensors/1166149 "2023-09-07T13:44:27Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![awneil](https://avatars.discourse-cdn.com/v4/letter/a/49beb7/32.png) [@awneil](https://forum.arduino.cc/u/awneil)\
**Post date:** [September 7, 2023, 1:52pm UTC](https://forum.arduino.cc/t/reading-multiple-ds18b20-sensors/1166149/4 "2023-09-07T13:52:45Z")

</div>

The simple drive with just a passive pull-up is fine in simple cases - but maybe not so much when you come to large networks of many sensors.

Take a look at this:

> **[Guidelines for Reliable Long Line 1-Wire Networks | Analog Devices](https://www.analog.com/en/technical-articles/guidelines-for-reliable-long-line-1wire-networks.html)**
>
> IntroductionThe 1-Wire protocol was originally designed for communication with nearby devices on a short connection, such as adding auxiliary memory on a single microprocessor port pin. As the use of 1-Wire devices increased, methods were developed...

---

_[View the full topic](https://forum.arduino.cc/t/reading-multiple-ds18b20-sensors/1166149)._
