At the moment I have a touch screen that I usually interface to via Windows (serial DB9 RS232 connection). I noticed it has a RX/TX/VIN/GND/SHIELD pins on the controller, so I soldered a pin from the RX on the touch controller to pin 2 on my Arduino. How should I read this output? There is definite…

Reading the output of a TX into an RX

Topic		Replies	Views
rs232 input from a sensor Syntax & Programs	11	10037	May 6, 2021
Aiuto comunicazione seriale Generale	3	1196	May 7, 2021
read rs232 from external device Networking, Protocols, and Devices	3	3762	May 6, 2021
question about serial(read post) Interfacing	11	4489	May 6, 2021
Serial port RS-232 Device Hacking	7	3800	May 6, 2021