RFID Project Assistance.

Projects General Guidance
1

Dear ALL Forum members,

I am Software Engineer and need to build an prototype. Please can you recommend the hardware componets according the requirements specified below

I have an Arduino UNO starter Kit here, also have an Arduino DUE

The basics of the system are as follows:

  • RFID scanner (with buzzer if available) and Tokens required.

  • Display LCD/VFD/Serial, Need to have 16 characters x 2 lines.

  • Also need an PUSH button to control when the RFID needs to Stop/Start Scan - If its embedded in RFID/Display, my job is easier.

Regards,
jainvikas8

P.S: Requesting moderator to post this topic to relevant section

2

if you are interested in making this prototype using 8052 controller then i can give you the entire project based on your requirements.

3

I don't mind having a brief summary about the project on how that project was achieved. Thanks

4

RFID-Based Security System

Radio-frequency identification (RFID) based access-control system allows only authorized persons to enter a particular area of an establishment. The authorized persons are provided with unique tags, using which they can access that area. The system is based on micro controller AT89C52 and comprises an RFID module, an LCD module for displaying the status and a relay for opening the door.

5

auro:
RFID-Based Security System

Radio-frequency identification (RFID) based access-control system allows only authorized persons to enter a particular area of an establishment. The authorized persons are provided with unique tags, using which they can access that area. The system is based on micro controller AT89C52 and comprises an RFID module, an LCD module for displaying the status and a relay for opening the door.

That is an sort of application i need to develop with minor tweaks, but are we talking about custom based PCB here? because I have to consider cost of Software and Hardware development with necessary gear therefore opted for Open-source like Arduino. As Atmel AT89C52 is more than enough to develop the RFID application.

6

you can easily modify it bcoz from this idea we have made RFID based toll tax system as a project and it can be build in a normal pcb and it is cost effective. Atmel AT89C52 has 32 I/O pins so you can add lot of things to your prototype.

7

auro:
you can easily modify it bcoz from this idea we have made RFID based toll tax system as a project and it can be build in a normal pcb and it is cost effective. Atmel AT89C52 has 32 I/O pins so you can add lot of things to your prototype.

Yes, I can add things to it, But I am not an Hardware Engineer to make electronic circuit, I merely write the Embedded C code by looking at the datasheets... If somebody can build for me then I am willing to pay them, programming part i can easily take care of it...

8

what is your requirement? let me know, i can try.

9

auro:
what is your requirement? let me know, i can try.

Thanks Auro,
We are better off discussing that on skype : indytech_vikas

then i can freely let you know my requirements and we can be introduced properly.

10

ya sure!! you can mail me on arabindo045@gmail.com

11

i m having problem with skype. can you join in gmail??