# Running special clock with motor controller

**URL:** <https://forum.arduino.cc/t/running-special-clock-with-motor-controller/1159828>\
**Category:** General Guidance\
**Created:** [August 19, 2023, 1:30pm UTC](https://forum.arduino.cc/t/running-special-clock-with-motor-controller/1159828 "2023-08-19T13:30:19Z")\
**Posts on this page:** 1\
**Showing post:** 100

<div class="post-metadata">

**Author:** ![graaskov84](https://avatars.discourse-cdn.com/v4/letter/g/a9adbd/32.png) [@graaskov84](https://forum.arduino.cc/u/graaskov84)\
**Post date:** [September 24, 2023, 11:04am UTC](https://forum.arduino.cc/t/running-special-clock-with-motor-controller/1159828/100 "2023-09-24T11:04:06Z")

</div>

> [@Wawa](#):
>
> Q: **[What time zone do you live in](https://github.com/nayarsystems/posix_tz_db/blob/master/zones.csv)** (post number from the list).

330

> [@Wawa](#):
>
> I mentioned PLL (phase locked loop) a few times.  
> I think you should have a freerunning clock is nudged slightly until in sync with epoch.

That explanation you made in your [post](https://forum.arduino.cc/t/1hz-pulse-for-mechanical-clocks-with-ntp-sync/1162117) makes sense to me - it is smart to have the internal clock of the ESP being synced with the NTP and then correct that difference over some time (to speed up/down the ticking until it is in sync with the internal clock again) - I'm just a real noob at coding this - learning slowly how this works 🙂

---

_[View the full topic](https://forum.arduino.cc/t/running-special-clock-with-motor-controller/1159828)._
