Couldn't be more excited to get my Vidor in the mail yesterday. Have been at it all day today going through Getting Started and the libraries, and had some success but am now having consistent issues with uploading.
I started by installing the Vidor board via Boards Manager. Got the Blink sketch working. All good.
Found and installed the VidorGraphics and VidorPeripherals libraries and ran VidorTestSketch. I get upload errors and dig around on the forum until I found Dario's suggestion to someone else having difficulties to double click the Vidor's reset button. That worked! So that's good. It uploads and spits out all the text it should to the Serial Monitor.
I start looking through the libraries, I put together something basic with the VidorGraphics library, do the double click on the reset button, and hit upload. Nothing is connected to the board besides the USB cable at any point, I did this just to see if I could code any simple thing from scratch using the libraries and get it to compile and upload.
From this point forward, any sketch that includes VidorGraphics, even an otherwise empty one, gets stuck at the address shown here:
[=========== ] 37% (3968/10466 pages) SAM-BA operation failed write(addr=0x20005000,size=0x1000) writeBuffer(scr_addr=0x20005000, dst_addr=0x40000, size=0x1000) An error occurred while uploading the sketch
And any sketch that includes VidorPeripherals, even an otherwise empty one, and even VidorTestSketch which worked fine 30 mins earlier, gets stuck in the same place and fails.
[============= ] 46% (3968/8529 pages) write(addr=0x20005000,size=0x1000) SAM-BA operation failed writeBuffer(scr_addr=0x20005000, dst_addr=0x40000, size=0x1000) An error occurred while uploading the sketch
Any sketch that does not include the Vidor libraries, uploads and appears to work just fine.
Any help would be very much appreciated! I am so excited to learn to use the Vidor for audio and video so I'm really hoping I can solve this and get back to the fun stuff.