Hello all,
I'd like to have some feedback on a schematic I created for a board I'm working on.
I don't need regulation or serial, the programming will be done through the 6 pin headers (ICSP) and the AVR ISP mkii.
Thanks!
Pat
Don't connect AREF to Vcc, just provide it with its own 0.1uF decoupling capacitor to
ground.
Perhaps add another decoupling cap on Vcc - provide one for each supply pin
ideally.
If using analog inputs I'd add something like 47uF as well on AVcc, and connect AVcc to
Vcc with a ferrite bead, to get a cleaner AVcc.