Scroll option of BLE using imu 6050 sensor

Other Hardware Sensors
1

Hi , Can anyone can tell me how i could use the scroll option of BLE using imu 6050 sensor on arduino ide .I will attach the code

#include <BleMouse.h>

BleMouse bleMouse;

void setup() {
  Serial.begin(115200);
  Serial.println("Starting BLE work!");
  bleMouse.begin();
}

void loop() {
  if(bleMouse.isConnected()) {

    unsigned long startTime;

    Serial.println("Scroll up");
    startTime = millis();
    while(millis()<startTime+2000) {
      bleMouse.move(0,0,1);
      delay(100);
    }
    delay(500);

    Serial.println("Scroll down");
    startTime = millis();
    while(millis()<startTime+2000) {
      bleMouse.move(0,0,-1);
      delay(100);
    }
    delay(500);

    Serial.println("Scroll left");
    startTime = millis();
    while(millis()<startTime+2000) {
      bleMouse.move(0,0,0,-1);
      delay(100);
    }
    delay(500);

    Serial.println("Scroll right");
    startTime = millis();
    while(millis()<startTime+2000) {
      bleMouse.move(0,0,0,1);
      delay(100);
    }
    delay(500);

    Serial.println("Move mouse pointer up");
    startTime = millis();
    while(millis()<startTime+2000) {
      bleMouse.move(0,-1);
      delay(100);
    }
    delay(500);

    Serial.println("Move mouse pointer down");
    startTime = millis();
    while(millis()<startTime+2000) {
      bleMouse.move(0,1);
      delay(100);
    }
    delay(500);

    Serial.println("Move mouse pointer left");
    startTime = millis();
    while(millis()<startTime+2000) {
      bleMouse.move(-1,0);
      delay(100);
    }
    delay(500);

    Serial.println("Move mouse pointer right");
    startTime = millis();
    while(millis()<startTime+2000) {
      bleMouse.move(1,0);
      delay(100);
    }
    delay(500);

  }
} 
`
2

This topic was automatically closed 180 days after the last reply. New replies are no longer allowed.