sd card and real time clock for Uno R3

Projects General Guidance
1

Hi

New to Arduino so just need some simple information.

If I am correct, the Arduino Zero controls/reads real time and one would use an Arduino Ethernet Shield for reading/writing to a SD card.

I have an Arduino Uno R3.

Is there a board (shield?) than will perform both functions?

Thanks for any help. Have a nice day.

2

I'm pretty sure there isn't. It isn't too hard to make one up yourself, using a prototyping shield plus the relevant modules, which are very cheap. You would likely include headers for sensors and other useful stuff.

3

I'm pretty sure I have seen some Data-Logging shields which have SD Card and RTC.
Tr y searching Google/eBay.

4

This 1284P board I offer has DS1307 battery backed RTC and fully buffered SD card socket. Available with & without screw terminals, and with onboard or off board, FTDI module for USB/Serial interface. 2nd hardware serial has RS232 buffer available as well, and +5/Gnd next to all 32 IO pins.
http://www.crossroadsfencing.com/BobuinoRev17/

1045×620 115 KB
1047×813 153 KB

5

HI All
Great. Thanks for the suggestions.
I'll now have to take a look.
Have a nice day.

6

aisc:
//www.ebay.com/sch/i.html?_odkw=datalogger&_osacat=0&_from=R40&_trksid=p2045573.m570.l1313.TR0.TRC0.H0.Xdatalogger+shield.TRS0&_nkw=datalogger+shield&_sacat=0[/url]

Gee, I missed that. It seems ideal...