Serial array issues

Hi, Im having problems storing arrays of data from the serial input of the arduino, I made a program to read the data and print back the array ordered but it does not seem to work.

It prints this.

I recived: 1-0-0-0-0-0-0-0-
I recived: 2-0-0-0-0-0-0-0-
I recived: 3-0-0-0-0-0-0-0-

When it should be printing this.

I recived: 1-2-3-0-0-0-0-0-

Can anyone tell me where Im wrong?

Here is the code, the program reads it ok just does not store it correctly.

int d[8];
int b = 0;

void setup() {

void loop() {
  b = 0;
  for(b = 0; b < 8; b++) { //Clears the array
    d[b] = 0;
  b = 0;
  while(Serial.available() > 0) { //Verifies serial byte ready
    Serial.println(""); //New line
    Serial.print("I recived: "); //Prints the start mesage
    for (b = 0; b < 8; b++) { //Increase array location
      while(Serial.available() > 0) {  //Verifies serial byte ready
        d[b] = - 48; //Stores data on array location
      Serial.print(d[b]); //Prints data array location
      Serial.print("-"); //Separator

Moderator edit: Bold code removed by adding code tags.

Think about how fast serial characters are transmitted and received, compared to how fast the microcontroller runs.

See if a character is available to read.
Read it.
See if there are any more characters to read - there almost certainly are none.
Reset your array and repeat.