Serial communication

Projects General Guidance
3

thanks for getting back so quickly!

i had a slight keyboard issue and i submitted the post withough typing almost anything out.

The setup is very simple

Arduino 1 Arduino 2
TX1<--------------->RX0
RX0<--------------->TX1

here is my real code:

//Transmitter code

counter = 1;

void setup(){
Serial.begin(9600);
}

Void loop(){
Serial.print(counter);
delay(10);
}

//Receiver code

Void setup(){
Serial.begin(9600);
}

Void loop(){
if (Serial.available()>0){
incomingByte = Serial.read();
Serial.print(incomingByte, DEC);
}
incomingByte = 0;
}