I am using the serisl plotter for the first time; however, it draws the graph so fast that it is basically useless. The IDE is 2.3.2. The sketch is: #include <Arduino.h> const uint16_t DELAY_TIME = 500; void plot_sin_cos(); void setup() { Serial.begin(115200); } void loop() { plot_sin_cos…

Your number of sample points is too high, right now you are using 360 sample points. reduce it and you can reduce the horizontal scaling. for eg instead of i++ , use i+20. Image below shows the result. [image]

Serial plotter output too fast

Development Tools IDE 2.x

JohnLincoln March 11, 2024, 1:15pm 11

Thank you, ptillisch.

My reply in post #9 was based on a post on that github page:
"Alex-Tsyganok commented on Dec 5, 2022".

Topic		Replies	Views
Serial plotter very fast in adruino 2.1 IDE 2.x	15	2889	November 1, 2023
Serial Plotter's horizontal scale IDE 2.x	4	3723	January 17, 2023
Plotter with more samples in the window IDE 2.x	3	1552	June 8, 2023
Simple suggestions for serial plotter Suggestions for the Arduino Project	1	865	May 6, 2021
Arduino 2.0 Serial Plotter issue IDE 2.x	5	8611	August 2, 2022

Serial plotter output too fast

Related topics