Hey all, I would like some advice on the best approach to program my project. I basically have some coils being driven with PWM signals, and an optical encoder attached to an interrupt. In my main loop I output angle of rotation and RPM of the encoder using Serial print, and send PWM to my coils. I am trying to serial print the encoder values, every 1 second for example from the main loop, but the way I was running my PWM coil signals is by using delay to keep sending the same pulse. What other way can I do this? I.e. how can make my serial.print independent of any of the delays I may be using in my code? Should I make a PWM function that I pass the duty cycle and period I want that cycle to run for? how would I implement period size control of the PWM signal? I hope Im making sense, Thank y'all!

[image] falconmagnets1010: What other way can I do this? Use a millis() based approach. E.g. [image] Demonstration code for several things at the same time General Guidance NOTE for newcomers. The demo is entirely contained in this Post and Reply #1. There is no need to read further unless you are interested. ...added 25Sep2014 There have been a few occasions recently where newcomers seemed to have difficulty applying the "blink without delay" and "state" concepts to a sketch that is intended to manage a number of concurrent actions. Its very time consuming to respond with suitable code examples - particularly as every case is a little different. I have prepared… [image] Using millis() for timing. A beginners guide Tutorials Part 1 It is not usually long before new Arduino users discover that although the delay() function is easy to use it has side effects, the main one of which is that its stops all activity on the Arduino until the delay is finished (not quite true, I know, but that is usually how the problem presents itself). When this occurs the new user is usually directed to the BlinkWithoutDelay example sketch (BWoD) and/or the excellent thread entitled Several things at the same time. Several things at the…

got you! should I keep the main loop for just serial printing, and then call functions for all other actions on the board? like sending signals to PWM & reading encoders? I read something about adding the interval vs. doing the different between current milli's, with regards to ensuring a consistent period of the same size, could you elaborate on that for me please? Thanks!!

[image] falconmagnets1010: how can make my serial.print independent of any of the delays I may be using in my code? Should I make a PWM function that I pass the duty cycle and period I want that cycle to run for? how would I implement period size control of the PWM signal? When you do not use any delays in the rest of your unknown code you could do a simple "Blink Without Delay" based function to print something every second. void onceASecond() { static uint32_t previousMillis = 0; if (millis() - previousMillis > 1000) { previousMillis = millis(); Serial.print(F("something=")); Serial.println(rpm); // rpm needs to be a global variable. } } call onceASecond(); in your loop and you will see that something gets printed once a second.

Serial Print and PWM signals

Projects Programming

sterretje September 3, 2024, 2:45pm 2

Use a millis() based approach.

E.g.

Topic		Replies	Views
Losing encoder pulses from serial print Motors, Mechanics, Power and CNC	7	847	December 13, 2021
Code only works when I use Serial.print(...) Programming	6	359	January 18, 2024
Using multiple millis() functions in a row Programming	36	1671	January 20, 2024
The output is coming slowly to serial monitor Programming	11	316	February 25, 2025
LEDs operating one at a time, not simultaneously LEDs and Multiplexing	6	156	October 10, 2024

Serial Print and PWM signals

Related topics