i am making a Servo driver/reader with atmega 168, it reads 9 servos and drives 9 servos. Does this requires it to run on 16mhz crystal or is it good enough with 8mhz? ( having problem with fitting the crystal on my pcb). Do I need to connect all vcc/gnd pins on the avr? The servos are powered wi…

Servo driver/reader with atmega 168/328

Topic		Replies	Views
16mhz ATMega328 at 4.5v? Development	12	7926	May 6, 2021
4.5v AtMega with 5v FTDI Development	13	5313	May 6, 2021
Multiple Servo? Interfacing	44	20366	May 6, 2021
Provide more current to servos when they need it? Interfacing	39	12854	May 6, 2021
Arduino with 12 servos Interfacing	33	22267	May 6, 2021