Servo Jitters back

[alto777]

@reliefpfeiler

why does the servo still turn very slowly sometimes

1500 microseconds or 90 degrees should stop the continuous rotation servo. But the value might be slightly wrong.

You'll have to experiment a bit to calibrate that value for your servo.

See

Continuous Rotation Servo - Servo.Write() value to stop servo?

Hi everyone, I'm currently building my first robot based on the Arduino Uno R3 microcontroller. The first program I created is to test the servos by making the robot move forward, backwards, left, right, stop, etc... The program listing told me to use a Write() value of 90 in order to stop both of the servos, but they still moved a bit. I experimented a bit and found that a value of 94 then worked. Can someone help me understand why the value of 90 didn't work? Thanks, Ken

a7