Hi Jremington,
thanks a lot for your post and Pololu power switches. The Mini LV looks really good. I will probably order one for testing. I just need to ask you if I understand correctly the wiring there. If I am correct then I should apply the voltige for load to VIN and GND pins. In my case it means 6AA batteries which will power the servo. If I correctly red the documentation then the consumption is 210 mikroAmps per 1 volt. In my case it will be about 1,5 mA. In case I would not use this power switch, then the power consumption of servo should be 4mA. It means I can save about half of the current when in idle mode lets say. It is not bad but I expected a bit more. Anyway like I said I would like to test the Mini LV anyway. So thanks for your info in the post.