# Share tips you have come across

**URL:** <https://forum.arduino.cc/t/share-tips-you-have-come-across/428745>\
**Category:** General Electronics\
**Created:** [January 4, 2017, 7:20am UTC](https://forum.arduino.cc/t/share-tips-you-have-come-across/428745 "2017-01-04T07:20:57Z")\
**Posts on this page:** 1\
**Showing post:** 753

<div class="post-metadata">

**Author:** ![LarryD](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/larryd/32/215550_2.png) [@LarryD](https://forum.arduino.cc/u/LarryD)\
**Post date:** [March 15, 2020, 12:43am UTC](https://forum.arduino.cc/t/share-tips-you-have-come-across/428745/753 "2020-03-15T00:43:11Z")

</div>

Syringe storage:

Once my Solder Paste syringe is load, I do not like to dismantle any part of it.

To prevent the paste from drying out make a DIY Luer Lock cap.

The Heat Shrink cap can be removed and re-used.

 ![LuerCap2.jpg](https://europe1.discourse-cdn.com/arduino/original/4X/9/c/6/9c69858dff492b963a15d207574692e65f05ecf0.jpeg)

 ![LuerCap3.jpg](https://europe1.discourse-cdn.com/arduino/original/4X/f/5/7/f571d8598e7480a00fcc4bd9ce8a8f68ec89b9f3.jpeg)

 ![LuerCap4.jpg](https://europe1.discourse-cdn.com/arduino/original/4X/e/9/1/e9195b9cb09e6515e2b447dbd984be04f237a2b1.jpeg)

 ![LuerCap1.jpg](https://europe1.discourse-cdn.com/arduino/original/4X/4/a/2/4a2a31a591fc28a6f39d9c82e8164931212bf452.jpeg)

---

_[View the full topic](https://forum.arduino.cc/t/share-tips-you-have-come-across/428745)._