# Signal Distortion Problem

**URL:** <https://forum.arduino.cc/t/signal-distortion-problem/1230286>\
**Category:** Sensors\
**Created:** [March 1, 2024, 6:55am UTC](https://forum.arduino.cc/t/signal-distortion-problem/1230286 "2024-03-01T06:55:47Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![aquimat](https://avatars.discourse-cdn.com/v4/letter/a/ce7236/32.png) [@aquimat](https://forum.arduino.cc/u/aquimat)\
**Post date:** [March 1, 2024, 6:55am UTC](https://forum.arduino.cc/t/signal-distortion-problem/1230286/1 "2024-03-01T06:55:47Z")

</div>

Hello everyone,  
I have a strange problem with my Arduino project using the MAX6675 module to read type K thermocouples. The Arduino is connected to a notebook. When the notebook runs on battery, without using the 230V power adapter, I can read data from the MAX6675 module without any issues. However, when I plug in the power adapter to the notebook, the readings immediately become bad (showing very low values).  
The thermocouple is grounded in steel and is in contact with a metal container that's also grounded (it has its own control electronics). The notebook is plugged into a different electrical outlet with its own ground.  
I'm worried that there might be a ground loop causing this problem. How can I fix it?

Thank you. Ciao

P.S. Sorry for my bad english....

---

<div class="post-metadata">

**Author:** ![TomGeorge](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/tomgeorge/32/215261_2.png) [@TomGeorge](https://forum.arduino.cc/u/TomGeorge)\
**Post date:** [March 1, 2024, 7:58am UTC](https://forum.arduino.cc/t/signal-distortion-problem/1230286/2 "2024-03-01T07:58:08Z")

</div>

HI, @aquimat

Try putting a 0.1uF capacitor across the thermocouple inputs on the MAX6675, I had a similar problem when calibrating a unit.

How long is the thermocouple wiring?

Thanks.. Tom.. 😀 👍 ☕ 🇦🇺

---

<div class="post-metadata">

**Author:** ![pert](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/pert/32/217111_2.png) [@pert](https://forum.arduino.cc/u/pert)\
**Post date:** [March 1, 2024, 8:00am UTC](https://forum.arduino.cc/t/signal-distortion-problem/1230286/3 "2024-03-01T08:00:53Z")

</div>

I have deleted your other cross-post @aquimat.

Cross-posting is against the Arduino forum [rules](https://forum.arduino.cc/faq#keep-tidy). The reason is that duplicate posts can waste the time of the people trying to help. Someone might spend a lot of time investigating and writing a detailed answer on one topic, without knowing that someone else already did the same in the other topic.

Repeated cross-posting can result in a suspension from the forum.

In the future, please only create one topic for each distinct subject matter. This is basic forum etiquette, as explained in [the " **How to get the best out of this forum**" guide](https://forum.arduino.cc/t/how-to-get-the-best-out-of-this-forum/679966). It contains a lot of other useful information. Please read it.

Thanks in advance for your cooperation.

---

<div class="post-metadata">

**Author:** ![aquimat](https://avatars.discourse-cdn.com/v4/letter/a/ce7236/32.png) [@aquimat](https://forum.arduino.cc/u/aquimat)\
**Post date:** [March 9, 2024, 11:29am UTC](https://forum.arduino.cc/t/signal-distortion-problem/1230286/4 "2024-03-09T11:29:42Z")

</div>

> [@pert](#):
>
> Repeated cross-posting can result in a suspension from the forum.

I apologize. I posted my issue on the international forum because no one had responded to my question on the Italian forum.

> [@TomGeorge](#):
>
> Try putting a 0.1uF capacitor across the thermocouple inputs on the MAX6675, I had a similar problem when calibrating a unit.

I tried your suggestion, but it had no effect.

> [@TomGeorge](#):
>
> How long is the thermocouple wiring?

The thermocouple wiring is about 70 cm long, and I don't think that's the source of the problem because when I connect another thermocouple (with the sheath not grounded), I don't have any signal issues.

---

<div class="post-metadata">

**Author:** ![system](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/system/32/1140315_2.png) [@system](https://forum.arduino.cc/u/system)\
**Post date:** [September 5, 2024, 11:30am UTC](https://forum.arduino.cc/t/signal-distortion-problem/1230286/5 "2024-09-05T11:30:36Z")

</div>

Closed on September 5, 2024, 11:30am UTC

This topic was automatically closed 180 days after the last reply. New replies are no longer allowed.
