Ciao Guglielmo e grazie per la pazienza, ho risaldato il ponticello nella posizione corretta, purtroppo il problema persiste. Quando provo a fare up (succedeva anche prima del ponte tra 5V e VCCIO) dello sketch con il modulo collegato (pwr->2 rxd->tx txd->rx 5v gnd-> 5v gnd) mi da questo errore:
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x00
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x00
An error occurred while uploading the sketch
Per fare up correttamente dello sketch devo scollegare il modulo e ricollegarlo per farlo girare. Ho notato che sia che io inserisca la sim (led lampeggiante ogni secondo) sia che io non la inserisca (led fisso acceso) l'output sul monitor rimane lo stesso: durante la funzione powerOn() si blocca e continua a stampare su video AT+CREG?