SM5100B shield with UNO R2 & (IDE 1.0)

I want to post this code to the forum for those that are using the SM5100B shield and programming with the IDE v.1.0

#include 
SoftwareSerial cell(2,3);

char phoneNumber[] = "1XXXYYYZZZZ";

void setup()
{ 
Serial.begin(9600);
cell.begin(9600);
delay(35000); // give the GSM module time to initialise, locate network etc.
}
void loop()
{
cell.println("AT");
delay(200);
cell.println("AT+CMGF=1"); // set SMS mode to text
delay(200);
cell.print("AT+CMGS=");  // now send message...
cell.write((byte)34); // ASCII equivalent of "
cell.print(phoneNumber);
cell.write((byte)34);  // ASCII equivalent of "
cell.println();
delay(200); // give the module some thinking time
cell.print("Enter your message here");   // our message to send
cell.write((byte)26);  // ASCII equivalent of Ctrl-Z
cell.println();
delay(15000); // the SMS module needs time to return to OK status

Too bad it's not complete.

What's missing?

There is no closing brace for your loop() function. There possibly should be something to check for the OK status you wait fifteen seconds for.