# \[SOLVED\] Audio input - headphone level input and using AREF

**URL:** <https://forum.arduino.cc/t/solved-audio-input-headphone-level-input-and-using-aref/1221402>\
**Category:** Audio\
**Created:** [February 8, 2024, 10:01am UTC](https://forum.arduino.cc/t/solved-audio-input-headphone-level-input-and-using-aref/1221402 "2024-02-08T10:01:51Z")\
**Posts on this page:** 1\
**Showing post:** 1

<div class="post-metadata">

**Author:** ![Lagom](https://dub1.discourse-cdn.com/arduino/user_avatar/forum.arduino.cc/lagom/32/1013044_2.png) [@Lagom](https://forum.arduino.cc/u/Lagom)\
**Post date:** [February 8, 2024, 10:01am UTC](https://forum.arduino.cc/t/solved-audio-input-headphone-level-input-and-using-aref/1221402/1 "2024-02-08T10:01:51Z")

</div>

For working with audio input (AC) - from a laptop's or smartphone's headphone output (TRS jack) or a PC's soundcard output (RCA jack) and using a 5V microcontroller with 10-bit ADC - what is the preferred way? It seems like after 2,5V baseline shifting (DC), output from a PC's soundcard yields a much better range of 580 peak-to-peak, compared to a mere 183 peak-to-peak from a headphone output. Is this a good way to think about it? If one were forced to use a headphone output, is the only viable option to use 3.3V AREF, so the baseline would sit at 1.65V? Thanks for some clarifications!

 ![Audio in levels 5V](https://europe1.discourse-cdn.com/arduino/original/4X/1/a/3/1a30257a5c90c5cb3d9e0693109d63e486750e6c.png)

---

_[View the full topic](https://forum.arduino.cc/t/solved-audio-input-headphone-level-input-and-using-aref/1221402)._
