Hi Everyone, So One Day I Decided To Try Out MicroPython And Flashed The Firmware To My Nano RP2040 Connect (NRPC For Short) But Then I Realized I Couldn't Flash Arduino C++ Anymore. So I Used A blink.ino.elf.uf2 File And Flashed It On. But Now It's Just GONE. I Tried The REC To GND Trick, I Tried…

At the risk of stating the obvious, have you tried another USB cable? You can also try holding down BOOTSEL while plugging into USB.

Solved! - Bricked My Nano RP2040 Connect

standardsidewinder883 June 30, 2025, 1:41pm 3

It Doesn't. The Mass Storage Device Doesn't Open.

Topic		Replies	Views
Nano RP2040 Connect not showing as a device under ports Nano RP2040 Connect	33	11065	November 22, 2021
No port for Nano RP2040 Connect even after installing Blink UF2 Nano RP2040 Connect	5	1709	April 21, 2022
SOLVED - Nano RP2040 Connect not working, tried everything Nano RP2040 Connect	8	4947	May 31, 2022
RP2040 Nano Connect crashes on blink.ino.elf.uf2 Nano RP2040 Connect	26	4684	February 13, 2022
[Solved] Nano RP2040 Connect does not accept *.uf2 Nano RP2040 Connect	13	6120	December 17, 2021